Quickly put the soldering iron over the tinned wire. While the solder is still in liquid form, place the tinned end of the black wire into the negative connector solder cup. Again, the solder will flow into the connector once the proper temperature is reached. Using the soldering iron to melt solder in the negative connector solder cup. Once the connector has cooled enough to comfortable touch the XT60 connector, loosen the mounted clamps and turn the connector 180 degrees so that the marked negative (-) side is now facing up. If it takes a long time for the tinned solder of wire to merge with the connector, it take longer for the connector to cool down. Note that this time may vary depending on soldering skill. Wait approximately 30 seconds for the connector to cool down. Be sure to keep the wire in position until the solder has solidified. Once the melted solder has made connection, remove the soldering iron and place it in the holder. You will see the solder on the wire liquefy and merge with the solder in the connector solder cup. While the solder is still in liquid form, place the tinned end of the red wire into the positive connector solder-cup. The solder will flow into the connector once the proper temperature is reached. Using the soldering iron to melt solder in the positive connector solder cup. Do not touch the connector until you are sure it has cooled down! It is best to hold the wire at a safe distance from the heat but with enough control to maintain the position of the wire until the solder has solidified. Place the XT60 Connector in the mounted clamps so that the marked positive (+) side is up.īefore performing the next step you must realize that the connector will retain heat for a short period of time. Slide one piece of heat shrink on each wire. It is important that your cuts be straight to avoid exposed metal in the future. Using the cutting tool, cut two pieces of heatshrink 1/2 in. Use the soldering iron to melt solder on the exposed metal of each wire. Strip approximately a quarter inch of insulation from one side of each wire (black and red). See more about eliminating reverse polarity mistakes with the XT60 connector here! Usage Widely used on flight case, tool box, transportation equipment,military box, musical instrument.XT60 connectors can be used to make reverse polarity mistakes a non-factor! This tutorial explains a quick an easy way to solder wires to the connectors.

Packing Packed it with soft white paper Put into small box or carton,then put into master carton Load to pallet if customer request Packaging Details: Packing is standard asĮm Name Heavy Duty Plastic Luggage Suitcase Case Pull Handles Carry Handles.Normally 2-7 days, or depending on quantity and requirementsįree sample, but freight collected or prepay The more the quantity,the lower the price Widely used on flight case, tool box, transportation equipment,military box, musical instrument.Ĭustomized,we could design for you according your drawings and samplesĪcceptd if there is stock in our warehouse Packed it with soft white paper Put into small box or carton,then put into master carton Load to pallet if customer request Heavy Duty Plastic Luggage Suitcase Case Pull Handles Carry Handles Customized Drawing WithDecal/ Frosted/ Print Are Available As Request. Sufficient Inventory and Strong Production Capacity Ensure Timely DeliveryġPCS Per Bag With Label, Export Standard Carton Single row（2～16 Pins 20pins）, Double row(2～24Pins or Other), multiple row, Customizedģ0% Deposit In Advance, 70% Before Shipment, 100%, T/T In Advance

Insulation material: PVC, Rubber, PA66, Silicone Wire Cable are UL/CSA, CE, VDE, SAA, CB, ROHS, Etc.Conductor: high-precision copper, tinned copper. Various Wire Harness And Cable Assemblies Customized According to Customer Requires, Mainly used in Electronic products, Home appliances, Mechanical equipment, Medical equipment, Automotive and other fields. JST, Molex, TE&Tyco, AMP, JAE, HRS, JAM, SMK, ELCO, NTK, IRISO, FCI, SAMTEC, KET, YEONHO, UJU, JY, HANLIN

Handwarmer xt60 connector